İhlas Aura MaxiVac - Manual (Page 7)

Usage
Sweeping
• Our vacuum cleaners are equipped with multipurpose accessories and engineered with
economic design for dry sweeping and wet spill vacuuming.
IMPORTANT
NOW, YOUR DEVICE IS READY FOR SWEEPING
Open head unit by
releasing both
securing clips.
Lift head unit from
dirt collection tank.
Attach suction group. Place the sponge filter in
the direction of the arrow.
1 2 3 4
Pull power cable and
insert its plug into the
main power supply.
Press on green button
for power. If machine
is on, the led light will
be illuminated.
Insert handle into end of
telescopic tube
11 12 10 9
Place the filter slot in the
direction of the arrow.
Tighten the filter
securing lock clockwise.
Add clean water up to
the level indicated.
Place the head unit and
attach suction hose to
inlet connector.
5 5
6 7 8
1- The pump switch must NOT be used in any vacuuming mode. Use of the pump without water will
lead to PUMP FAILURE. Only switch the pump on when using your device for carpet washing purpose.
2- It is recommended that all filters be checked and cleaned after each use.
Attach floor cleaning
nozzle to telescopic tube
and lock it in place.