Samsung SR35 S27R356FHN 27" 16:9 FreeSync IPS Monitor - Manual (Page 32)

32
Eco Saving Plus
The Eco Saving Plus function reduces power consumption by controlling the electric current used by the
product panel.
―
This option is not available when SAMSUNG
MAGIC
Bright is in Dynamic Contrast mode.
―
This menu is not available when Game Mode is enabled.
―
This menu is not available when Eye Saver Mode is enabled.
• Off : Deactivate the Eco Saving Plus function.
• Auto : The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
• Low : The power consumption will be reduced by 25% over the default setting.
• High : The power consumption will be reduced by 50% over the default setting.
Off Timer
Off Timer : Turn on Off Timer mode.
Turn Off After : The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
―
This option is only available when Off Timer is set to On .
―
For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer to
activate, go to
→ System and set Off Timer to Off .
PC/AV Mode
Set PC/AV Mode to AV . The picture size will be enlarged.
This option is useful when you view a movie.
• Set to PC when connected to a PC.
• Set to AV when connected to an AV device.
―
Products with a display area of 16:9 or 16:10 are only supported.
―
If the product is in HDMI mode and the screen says Check Signal Cable , press the JOG button to display the
function-button screen and then select → System → PC/AV Mode → HDMI → PC or AV .
Source Detection
Select either Auto or Manual as the method to recognize input signal.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration , 1 sec , or 2 sec can be selected. If No Repeat is selected, a command responds only once
when a button is pressed.