Samsung S27R650FDN 27" 16:9 IPS Monitor (Dark Blue-Gray) - Manual (Page 24)

24
Tidying Up the Connected Cables (S24H650GD* / S27H650FD*)
1 2 3 4 4 4
Tilt the display, as shown in the figure. Rotate the machine to the highest vertical
position. Connect the corresponding cables. Arrange the cables through the groove on the
COVER-REAR, and then attach the COVER-REAR
SUB. When you attach the COVER-REAR SUB,
please aim six ribs of the COVER-REAR SUB to
the bottom holes of the COVER-REAR at first.
5
6 7
Arrange each of the two cables through either
side of the COVER-STAND CABLE, as shown in the
figure. Rotate the machine to the horizontal position. Assembly is complete.