Roland HandSonic HPD-20 Digital Hand Percussion Instrument - Manual (Page 65)

W
ha
t is
the
HandS
onic?
Q
uick
G
uide
Frequen
tly
U
sed
Func
tions
Par
amet
er
G
uide
A
ppendix
SYS
65
FOOT SWITCH CONTROL–POLARITY
MENU g SYS g FootSw Control g POLARITY
Parameter Explanation
Footswitch polarity settings
Here you can set the polarity of footswitches 1 and 2.
If the function operates when you take your foot off the footswitch, change this setting.
* If only one footswitch is connected, set “Foot Switch 1.”
Foot Switch 1,
Foot Switch 2 NORMAL Normal setting.
INVERSE Inverted polarity.
Options
OPTIONS
MENU g SYS g Options
Parameter Explanation
Overall settings for the entire HandSonic
Here you can make settings such as display brightness and auto-off.
Display Contrast
Adjust the contrast of the display.
The default value is “5.”
* In the kit screen, you can adjust this by holding down the [KIT] button and press the [-][+] buttons.
Display Brightness
Adjust the brightness of the display.
The default value is “8.”
Illumination
–/+ Buttons
If this is “ON,” the [-][+] buttons will be lit.
The default value is “ON.”
Pad Chase
If this is “ON,” striking a pad will select it for editing.
If this is “OFF,” hold down the [SHIFT] button and use the [ ] [ ] buttons to select a pad for editing.
The default value is “ON.”
Auto Off
When shipped from the factory, the HandSonic is set to automatically power-off when 4 hours have elapsed since it
was last played or operated.
* Approximately five minutes before the power turns off, a message will appear in the screen.
OFF The power will not turn off automatically.
4 HOURS The power will turn off automatically when 4 hours have elapsed.
USB Audio Volume
When the HandSonic is connected to a computer via USB, this parameter adjusts the volume of the sound from the
computer that is heard through the HandSonic.
The default value is “80.”
For details, refer to p. 44.
System Gain
Adjusts the output level of the OUTPUT jacks, PHONES jack, and USB audio.
Positive (“+”) settings increase the output level.
The default value is “0dB.”
Value Knob Lock
By turning this “ON,” you can disable the value knob.
Even if the value knob is disabled, you can use the [-][+] buttons to edit a value.
Write Protect
If this is “ON,” the current settings will be preserved, and any changes made subsequently will all be discarded when
you turn off the power.
Also, it will no longer be possible to import or delete user instruments, or to execute a Factory Reset.
The default value is “OFF.”