Communications protocol, Esc/vp21 commands – Epson EB 824 User Manual
Page 91
Advertising
• Projector input port name: RS-232C
<At the projector>
<At the computer>
<At the projector>
(PC serial cable)
<At the computer>
Signal Name
Function
GND
Signal wire ground
TD
Transmit data
RD
Receive data
DSR
Data set ready
DTR
Data terminal ready
Communications protocol
• Default baud rate setting: 9600 bps
• Data length: 8 bit
• Parity: None
• Stop-bit: 1 bit
• Flow control: None
ESC/VP21 Commands
91
Advertising