Sony ECM-678/9X Shotgun Microphone - Manual (Page 7)

7 US
US
 App buttons
 (Power): (It can be found by
removing the side cover)
 BUILT-IN MIC SWITCH: Turn on/off the
built-in MIC. (It can be found by
removing the side cover)
 Built-in MIC*
4
*
5
*
8
: To enable the
built-in MIC, press the Google Assistant
button on the remote control and
follow the on-screen instructions.
 Remote Control sensor / Ambient
light sensor / LED
*1 For other remote control models, refer to the
online Help Guide for details.
*2 The remote control backlight will illuminate
when the light sensor detects the ambient
light is low. Automatic illumination of the
backlight can be turned off.
*3 The buzzer will emit a sound when you use the
remote finder function. Refer to the online
Help Guide for details.
*4 Only for limited region/country/model/
language.
*5 Google Assistant requires an Internet
connection.
*6 Accessibility shortcut is available by pressing
and holding (Mute).
*7 [Cable/Satellite box setup] setting is required.
*8 Power consumption will increase when the
built-in MIC is enabled as it is always listening.
Guidelines for IR Remote Control
• Point your remote control directly at the IR
sensor located on your TV.
• Make sure that no objects are blocking
the path between the remote control and
the IR sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the
fluorescent lamps.
• If you are having problems with the
remote control, reinsert or replace your
batteries and make sure that they are
correctly inserted.
Installing the TV to the Wall
This TV’s instruction manual only provides
the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
Your TV can be mounted to a wall using a
suitable Wall-Mount Bracket (not supplied).
If the Table-Top Stand is attached to the TV,
the TV may require detaching the Table-Top
Stand; see “Detaching the Table-Top Stand
from the TV”.
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For more information, refer
to the Help Guide.
Press
(Input) on the
remote control and select
[Help]. If [Help] does not
exist, select [Edit] and add
[Help].
̛ ̚
̙
̘