Sony UWP-D26 Camera-Mount Wireless Combo Microphone System (UC14: 470 to 542 MHz) - Manual (Page 3)

Discover Optimized Weight
Balance
With an improved inside circuitry design, the PXW-X400
achieves power consumption as low as 22 W in normal recording
mode*. This enables continuous recording operation for
approximately 240 minutes with Sony’s BP-GL95A optional
standard-type battery.
* With XAVC recording, the color LCD is ON.
Versatile Output/Input Interfaces
Camcorder Lineup
PXW-X400KC
20x Manual Focus Zoom Lens Kit
3.5” LCD VF
Stereo Microphone
IFU-WLM3 (Wireless LAN Dongle)
Shoulder Strap
PXW-X400KF
16x Auto Focus Zoom Lens Kit*
3.5” LCD VF
Stereo Microphone
IFU-WLM3 (Wireless LAN Dongle)
Shoulder Strap
* Auto focus capability will be
available in June 2016.
PXW-X400
Body only (no lens or viewfinder)
User-customizable with a high-end lens, user-owned B4 lens, and/or
viewfinder
Supports Full HD OLED
Viewfinder
Equipped with two types of connectors for a viewfinder inter-
face, the PXW-X400 supports a variety of Sony’s viewfinders,
including the Full HD OLED HDVF-EL30* and HDVF-EL20*, as well
as the QHD LCD CBK-VF02.
The HDVF-EL30 has a 960x540 resolution sub-LCD panel.
Never before will you have held a camcorder that feels so
lightweight on your right hand. This minimizes your physical
stress even during the longest shooting operations. The
camcorder's center of gravity has been moved to the back of the
body to achieve optimized weight balance and stable image
shooting.
Low Power Consumption
There are three different products to choose from in the
PXW-X400 camcorder lineup:
HDVH-EL30
Inside
HDVH-EL30
Outside
HDVH-EL20
Outside
CBK-VF02
Outside
In addition to common interfaces, the PXW-X400 includes
versatile I/O interfaces such as:
• Dual 3G-SDI output which enables simultaneous output of up
to two 1080 50p / 59.94p signals
• Multi-purpose audio input that accepts both analog audio
signals and AES/EBU digital audio signals
• SDI input for pool-feed operation, so you can input and record
1.5G HD/SD-SDI distributed signals from another camera
Each connector is located separately and – as there’s no need
for you to switch between input and output – you can use these
connectors simultaneously.
3