Eureka 3281 - Manual (Page 4)

2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com
How to Identify Parts of Vacuum Cleaner
EXT-U Belt
HEPA filter
HF7
Screen
Filter
DCF21
Brush Roll
Handle
Turbo nozzle
Power switch
Filter, cover and screen
(located inside dust cup)
Dust cup
Nested crevice tool
& extension wand
HEPA filter compartment
Height adjustment knob
Brush roll cover
Headlight
Handle
release
Hose
Cord retainer
Handle height
adjustment
Carrying handle
Quick release cord wrap
Power cord
Dusting brush
Lower cord wrap
Hose retainer
Maintenance Schedule
Maintenance Schedule is also located on back side of dust cup.
! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Make sure power switch is in OFF (O) position before plugging in power cord.
DUST CUP – Empty after each use
HEPA FILTER HF7 – Replace within 6 months
Close bottom lid
until it clicks.
Press lever to release bottom lid.
Debris will empty.
BRUSH ROLL – Clean monthly
EXT-U BELT – Replace worn, cut or out of shape belt
Lay cleaner flat, grasp cover and pull off. Lift out filter and replace.
FILTER DCF21 – Clean or replace regularly, to maintain suction
Empty cup. Pull back
latch to lift off lid.
Pull out filter cover,
filter and screen.
Align lid at front; press down
until lid snaps into place.
Rinse dust cup;
dry thoroughly.
Reinstall screen,
filter and cover.
SPECIAL FEATURES
Available on some models
Turbo nozzle
Turbo nozzle clip
Filter cover
Brush debris from filter,
cover and screen. Wash and
dry thoroughly, as needed.