Startup guide, Step 1: charging the battery pack, Insert the battery pack into the battery charger – Sony a7R IIIA Mirrorless Camera User Manual

Page 26

Advertising
background image

ILCE-9M2
5-010-473-91 (1)

GB

26

C:\5010473911_GB100\5010473911ILCE9M2UC2\01GB-ILCE9M2UC2\020PRE.indd
DTP data saved: 2019/07/26 10:20
PDF file created: 2019/07/26 10:21

Startup guide

Step 1: Charging the battery pack

1

Insert the battery pack into
the battery charger.

• Place the battery pack on the

battery charger in the direction
of the

.

• Slide the battery pack in the

direction of the arrow as far as it
will go.

2

Connect the power cord
(supplied) to the battery
charger, and connect the
battery charger to the wall
outlet (wall socket).

The CHARGE lamp on the battery
charger will light up in orange and
charging will start.

CHARGE lamp (orange)
Lit: Charging
Flashing: Charging error or
charging paused temporarily
because the camera is not within
the proper temperature range

CHARGE lamp

To a wall outlet
(wall socket)

• When charging is finished, the CHARGE lamp and all indicators turn off.

• Charging time (full charge): approximately 150 min. (when charging a fully

depleted battery pack at a temperature of 25°C (77°F))

• When you use a completely new battery pack or a battery pack that has

not been used for a long time, the CHARGE lamp may flash quickly when
the battery is charged for the first time. If this happens, remove the battery
pack and then re-insert it to recharge.

• Be sure to use only genuine Sony brand battery packs.

Advertising