Sony VENICE 4K Live Bundle with MultiDyne SilverBack Fiber-Optic Adapter User Manual

Preparations, Shooting, About the manual for this camera

Advertising
background image

ZV-1F

5-041-855-11(1)

R:\CX64700(YT)_SG\JPEN\03_Compose\04_ENflyer_STT\5041855111\5041855111ZV1FIN5\EN1IN5.indd
DTP data saved: 2022/07/15 16:48
PDF file created: 2022/07/15 16:49

Preparations

Checking the supplied items

The number in parentheses indicates the number of pieces.

• Camera (1)
• Rechargeable battery pack NP-BX1 (1)
• USB Type-C® cable (1)
• Wind screen (1) (attached to the wind

screen adaptor)

• Wind screen adaptor (1)
• Lens cap (1) (attached to the camera)
• Startup Guide (this manual) (1)
• Reference Guide (1)

Inserting the battery pack (supplied)/memory card
(sold separately) into the camera

Open the battery/memory card cover, and insert the battery pack and a memory
card into the camera. Then, close the cover.

Ensure the notched corner faces

correctly.

Battery pack

Memory card

Lock lever

Battery pack

Make sure that the battery pack is facing in the correct direction, and insert it while
pressing the battery lock lever.

Memory card

Insert the memory card with the notched corner facing as illustrated.

This camera is compatible with SD memory cards or Memory Stick media. For
details on the compatible memory cards, refer to the “Help Guide.”

When you use a memory card with this camera for the first time, format the card
using the camera in order to stabilize the performance of the memory card.

Note

• Formatting erases all data, including protected images. Once erased, this data

cannot be restored. Save valuable data to a computer, etc. before formatting.

Charging the battery pack

Charge lamp

1

Turn the power off.

If the camera is turned on, the battery pack will not be charged.

2

Using a USB Type-C cable (supplied), connect the USB Type-C terminal
of the camera to an external power source, such as a commercially
available USB AC adapter or mobile battery.

The charge lamp will light up when charging starts. When the charge lamp turns
off, charging is completed.

Performing initial setup for the camera

By connecting the camera and a smartphone with the Bluetooth function, you can
perform initial camera setup such as date and time settings from the smartphone.
Install the dedicated smartphone application on your smartphone in advance.

Install the dedicated smartphone application from the following webpage.
Also, update to the latest version of the application.

https://www.sony.net/ca/

1

Press the ON/OFF (Power) button to turn
on the camera.

2

Select the desired language and then
press the center of the control wheel.

• The privacy notice screen will appear. Read

the privacy notice regarding biometrics by
opening the link using your smartphone, etc.

3

Press the center of the control wheel.

4

Follow the instructions on the camera
screen to register your smartphone.

• Launch the dedicated application on your

smartphone to pair the camera with your
smartphone.

• If you select to register your smartphone

later, the area/date/time setting screen will
appear.

• To register your smartphone to the camera

after the initial setup, select MENU

 (Network)

[Smartphone Connect]

[Smartphone Regist.].

ON/OFF (Power) button

Control wheel

Select items :

/

/

/

/ /

Confirm : Center button

5

Perform the initial camera setup on the screen of the dedicated
application.

• Follow the instructions on the screen to set the following items.

- Area/Date/Time

- Auto Power OFF Temp.

- Device Name
You can change these settings later from the camera menu.

Shooting

Shooting movies

1

Press the Still/Movie/S&Q button to select
the movie recording mode.

Each time you press the button, the shooting
mode switches in the order of still image
shooting mode, movie recording mode, and
slow-motion/quick-motion shooting mode.

2

Press the MENU button and select

 (Shooting)

[Shooting Mode]

[  Shoot Mode]

the desired shooting

mode.

MOVIE (Movie)

button

MENU button

Still/Movie/S&Q

button

3

Press the MOVIE (Movie) button to start recording.

4

Press the MOVIE (Movie) button again to stop recording.

Hint

• The start/stop movie recording function is assigned to the MOVIE (Movie) button

in the default settings. Even without switching shooting modes in Step 1, you
can start movie recording from still image shooting mode by pressing the MOVIE
(Movie) button.

Using the wind screen (supplied)

Use the wind screen to reduce wind noise picked
up by the internal microphone when recording a
movie.
Attach the wind screen to the Accessory Shoe.

Wind screen

Accessory Shoe

5-041-855-

11

(1)

ZV-1F

©2022 Sony Corporation Printed in Thailand

About the manual for this camera

https://rd1.sony.net/help/dc/2210/h_zz/

“Help Guide” (Web manual)

ZV-1F Help Guide

This guide describes the necessary preparations to start using the
product, basic operations, etc. For details, refer to the “Help Guide”
(web manual).

We use environmentally conscious packaging materials

Environmentally conscious packaging materials were used for the camera and
supplied accessories.
Note the following due to the characteristics of the packaging materials.

• Powder, etc. from the packaging materials may adhere to the camera or

supplied accessories. In this case, remove it with a commercially available
blower or cleaning paper before use.

• The packaging materials will deteriorate with continuous use. Be careful when

carrying the product by the packaging.

Digital Camera

Startup Guide

Looking for valuable information, such as essential points
on shooting

This website introduces convenient functions, ways of usage, and setting
examples.
Refer to the website when you set up your camera.

https://www.sony.net/tutorial/dc/zv1f/

Tutorials

Advertising