Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 20)

20
Changing the camera registration and
settings manually
You can change the group number, camera number, and
IP address assigned to a camera or clear the camera
registration manually using AUTO IP SETUP
>MANUAL.
1
Press the RM MENU button, turning it on
(button is lit yellow).
The RM menu top menu appears.
2
Turn the SELECT knob to move the cursor
to AUTO IP SETUP, and press the SELECT
button.
The AUTO IP SETUP menu appears.
3
Turn the SELECT knob to select MANUAL,
and press the SELECT button.
The MANUAL menu appears.
4
Turn the SELECT knob to move the cursor
to CAMERA under [CURRENT].
5
Turn the VALUE knob to select the camera
group number and the camera number of
the camera to change.
To change the registration
1 Turn the SELECT knob to move the
cursor to CAMERA under [CHANGE].
2 Turn the VALUE knob to select the
camera group number and the camera
number of the camera assignment to
change to.
To clear the registration
1 Turn the SELECT knob to move the
cursor to [CHANGE].
2 Turn the VALUE knob to change
[CHANGE] to [CLEAR].
6
Turn the SELECT knob to move the cursor
to MANUAL SET.
7
Turn the VALUE knob to change NOT EXEC
to EXEC, then press the VALUE button.
When changing the registration, a “WAIT FOR A
FEW SECONDS” message is displayed on the
screen.
8
Turn the VALUE knob to change NO to YES,
then press the VALUE button.
9
Check the result using AUTO IP SETUP
>CAMERA TABLE in the RM menu.
To check the camera table
You can check all the camera information in the camera
table.
1
Press the RM MENU button, turning it on
(button is lit yellow).
The RM menu top menu appears.
2
Turn the SELECT knob to move the cursor
to AUTO IP SETUP.
3
Press the SELECT button.
The AUTO IP SETUP menu appears.
4
Turn the SELECT knob to select CAMERA
TABLE, and press the SELECT button.
The CAMERA TABLE menu appears.
The camera information for cameras 1 to 5 in group
1 are displayed on the screen.
You can check the camera information for other
cameras not displayed by turning the VALUE knob.
The camera information for cameras 01 to 05 in a
group are displayed when LOWER is selected.
The camera information for cameras 06 to 10 in a
group are displayed when UPPER is selected.
LOWER display UPPER display
You can turn the SELECT knob to move the cursor
to CAM INFO, then turn the VALUE knob to
p GROUP NUM : 01-LOWER
LOWER or UPPER
Group number