StarTech.com Wall Mount Network Cabinet Enclosure (12 RU, 19") - Manual (Page 17)

Instruction manual
12
Install equipment
Warning! Do not add equipment to the enclosure until the enclosure is securely
attached to the wall.
Warning! When you load equipment into this enclosure, load the heaviest equipment
in the bottom section of this enclosure first. Continue loading equipment in a
descending order of weight, so that the lighter equipment is installed in the upper
sections of this enclosure and the heavier items are on the bottom.
This enclosure comes with cage nuts and screws but the equipment you’re installing
may come with mounting hardware. Consult the documentation that came with the
equipment to determine the best mounting hardware that you should use and how
you should install it.
1. Decide where in the enclosure you want to install the equipment and insert the
cage nuts in the mounting rails.
2. Line up the mounting holes on the equipment with the cage nuts.
3. Insert the screws through the mounting holes on the equipment and into the cage
nuts.