StarTech.com VGA to HDMI Converter and Scaler - Manual (Page 7)

Instruction Manual
4
4. Connect the VGA to HDMI converter to an available electrical outlet using the
included power adapter.
Operation
On screen display
The HDMI to VGA converter and scaler features an on screen display (OSD) menu that
enables you to adjust various picture settings to customize your output based on
your specific application. To access the OSD menu, press the on screen display menu
button, on the back of the VGA to HDMI converter.
To navigate the OSD menu, use the menu operation buttons (+ up) and (- down) on
the back of the VGA to HDMI converter, and the menu button to select each option on
the menu.
For complete OSD operation instructions please download the full product menu
at StarTech.com.
Factory default settings
Follow the below steps to restore the VGA to HDMI converter to the default settings.
1. Ensure the VGA to HDMI converter is powered on.
2. Hold down both the + and – operation buttons at the same time for three seconds.
3. The VGA to HDMI converter has now been restored to default settings.
Download the complete instruction manual at StarTech.com/support