Acer EI491CR SBMIIIPHX 49" DFHD 144 Hz Curved Gaming Monitor - Manual (Page 30)

19
English
12. DDC/CI: Allows the monitor settings to be set through the software on the PC.
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
13. HDMI Black Level: You can select the level of blackness under HDMI source.
14. Quick Start Mode: Select Off or On. The default is "Off". Turn on to speed up boot speed.
15. DFHD-144Hz Mode: Select Off or On. The default is "Off".
Note: When Overclocking is enabled, Over Drive will be automatically set to Off.
Meanwhile, Overclocking may result in flicker or other adverse effects that may
derive from the total configuration of the system connected to the display, and
possibly, in addition, the display’s panel specifications. It may be possible to
resolve or reduce such effects by setting a lower refresh rate.
Product information
1. Press the MENU key to open the OSD.
2. Using the
keys, select Information to view the basic information for your monitor
and current input.
3. Reset All Settings: Reset all settings to the factory defaults.
Mode - Standard
Color
Gaming
OSD
System
Main Source
DP
Resoiution
3840x1080
Picture
H/V Frequency
H: 67KHz V : 60Hz
Mode
SDR
Series Number
Reset All Settings
Information
Ř
!Ř 0