Brightness : the adjusting range is from 0 to 100 – Asus ProArt Display OLED PA27DCE-K 26.9" 4K HDR Monitor with Color Calibrator User Manual
Page 28
3-6
Chapter 3: General Instruction
2. ProArt Palette
Set a desired color setting from this menu.
To activate this function, you need to disable the Ambient Effect function.
Standard Mode
ProArt Palette
Brightness
Contrast
Saturation
Hue
Color Temp.
Gamma
RGB Tuning
Black Level
Color Reset
ASUS PA27DCE
60Hz
3840x2160@
HDMI-1
•
Brightness: The adjusting range is from 0 to 100.
When the HDR function is enabled, the maximum brightness level is
automatically set to 350nits as default.
•
Contrast: The adjusting range is from 0 to 100.
•
Saturation: The adjusting range is from 0 to 100.
•
Hue: Shifts the image color between green and purple.
•
Color Temp.: Contains 5 modes including 9300K, 6500K, 5500K, 5000K,
and P3-Theater.
When the ProArt Preset setting is set to DCI-P3 Mode, only 6500K and
P3-Theater options are available.
•
Gamma: Allows you to set the color mode to 1.8, 2.0, 2.2, 2.4, or 2.6.
•
RGB Tuning: Configures the color settings.
»
Gain: Adjusts the gain levels for the red, green, or blue color.
»
Offset: Adjusts the black level offset values for the red, green, or
blue color.
•
Black Level: Adjusts the initialized 1st signal level of darkest gray level.