Asus ProArt Display PA247CV 23.8" 16:9 Adaptive-Sync IPS Monitor - Manual (Page 17)

2-3 ASUS PA247CV Series LCD Monitor
2.4 Connecting the cables
Connect the cables as the following instructions:
• To connect the power cord : Connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
• To connect the HDMI/DisplayPort/USB Type-C* cable :
a. Plug one end of the HDMI/DisplayPort/USB Type-C* cable to the
monitor’s HDMI/DisplayPort/USB Type-C jack.
b. Connect the other end of the HDMI/DisplayPort/USB Type-C* cable to
your device’s HDMI/DisplayPort/USB Type-C jack.
It is suggested to use USB cerified Type-C cable. If the signal source supports
DP Alt mode, all video, audio and data signal can be transmitted.
• To use the earphone: connect the end with plug type to the monitor’s
earphone jack when an HDMI/DisplayPort/USB Type-C signal is fed.
• To use the USB 3.2 Gen 1 ports :
» Upstream: Use an USB Type-C cable and plug on end of the Type-C
connector to the monitor's USB Type-C port ( ) as upstream and the
other end to your computer's USB Type-C jack. Or use an USB Type-C
to Type-A cable and plug the Type-C connector to the the monitor's
USB Type-C port ( ) as upstream and the Type-A connector to your
computer's USB Type-A jack. Make sure your computer is installed with
the latest Windows 7/Windows 10 operating system. That will enable the
USB ports on the monitor to work.
» Downstream: Use an USB cable to connect your device with the
monitor's USB Type- A jack.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.