Asus 27" TUF Gaming 1440p 260 Hz Monitor - Manual (Page 27)

3-8 Chapter 3: General Instructions
• USB setup : Turns On/Off the USB Hub function during standby mode.
• Power Indicator : Turn the power LED indicator on/off.
• Power Key Lock : Enables or disables the power key.
• Key Lock : To disable all function keys. Press over 5 seconds to
cancel the key lock function.
• Power Setting:
* Standard Mode : Standard mode setting may result in higher
power consumption.
* Power Saving Mode : Power saving mode may cause limited
luminance performance.
Certain functions that consumes power will be disabled when Power Saving
Mode is selected. If you wish to enable the functions, choose Standard Mode .
Please turn off HDR function before activating the Power Saving Mode .
• OSD Setup :
* Adjusts the horizontal position (H-Position)/the vertical position
(V-Position) of the OSD.
* Adjusts the OSD timeout from 10 to 120 seconds.
* Adjusts the OSD background from opaque to transparent.
* Enables or disables the DDC/CI function.
• DisplayPort Stream : Compatibility with graphic card. Select DisplayPort
1.2 or DisplayPort 1.4 by graphic card DP version.
• Information : Shows the monitor information.
• All Reset : “Yes” allows you to restore the default settings.