Asus ProArt 27" 1440p 144 Hz Monitor - Manual (Page 22)

3-4 Chapter 3: OSD (On-Screen Display) menu
2. Palette
Set a desired color setting from this menu.
PA278CGV
2560x1440_144Hz Native Mode 50
Navigate Select Exit
Preset Signal
DisplayPort
Brightness
50
80
50
50
50
Brightness
Contrast
Saturation
Hue
Color Temp.
Gamma
RGB Tuning
Black Level
Preset
Palette
Image
PIP/PBP
QuickFit Plus
• Brightness : The adjusting range is from 0 to 100.
• Contrast : The adjusting range is from 0 to 100.
• Saturation : The adjusting range is from 0 to 100.
• Hue : Shifts the image color between green and purple.
• Color Temp. : Contains 5 modes including 9300K, 6500K, 5500K, 5000K
and P3-Theater.
• Gamma : Allows you to set the color mode to 2.6, 2.4, 2.2, 2.0 or 1.8.
• RGB Tuning :
* Adjusts the gain levels for R, G, B.
* Adjusts the black level offset values for R, G, B.
• Black Level : To adjust the initialized 1st signal level of darkest gray level.
* Signal : The adjusting range is from 0 to 100.
* Backlight : Allows you to set Normal Level or Deep Level .
• Color Reset :
* Current mode color reset :
Resets the color settings of current color mode to the factory
default value.
* All modes color reset :
Resets the color settings of all color modes to the factory default
value.