Asus ProArt 27" 1440p 144 Hz Monitor - Manual (Page 23)

3-5 ASUS PA278CGV Series LCD Monitor
3. Image
Set the image related setting from this menu.
PA278CGV
2560x1440_144Hz Native Mode 50
Preset
Palette
Image
PIP/PBP
QuickFit Plus
Navigate Select Exit
Preset Signal
DisplayPort
Brightness
Sharpness
Trace Free
Aspect Control
Input Range
Blue Light Filter
0
60
• Sharpness : The adjusting range is from 0 to 100.
• Trace Free : Adjusts the response time of the monitor.
• Aspect Control : Adjusts the aspect ratio to Full , Dot to Dot , or 1:1
Ratio .
• Input Range : To map signal range with whole black to white presented
range of display.
• Blue Light Filter: In this function, you can adjust the blue light filter from
0 to Max .
* 0 : No change.
* Max : The higher the level, the less blue light is scattered. When
blue light filter is activated, the default settings of Native Mode
will be automatically imported. Besides maximum level, the
brightness is user-configurable. Maximum is the optimized setting.
It is in compliance with TUV low blue light certification*. The
brightness function is not user configurable.
*When color augmentation is in default value (50).
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.