Asus Republic of Gamers Swift PG48UQ 47.5" 4K HDR 138 Hz Gaming Monitor - Manual (Page 22)

3-3 Chapter 3: General Instruction
2. Image
Configure the image settings.
Brightness 90
80
Aspect Control
HDR Setting
VividPixel
Contrast
Uniform Brightness
Blue Light Filter
MOVE/ENTER EXIT BACK
Gaming
System Setup
MyFavorite
PIP/PBP Setup
Color
Input Select
Image
HDR OFF
HDMI-1 3840x2160@ 60Hz
Racing Mode
ROG Swift PG48UQ
• Brightness : Adjust the brightness level.
• Uniform Brightness : With the feature enabled, the system
will not adjust the maximum brightness of the screen when the
screen is displayed in a different screen size.
• Contrast : Adjust the contrast level.
• VividPixel : Enhance the outline of the displayed picture and
generates high-quality images on screen.
• HDR Setting : Set the HDR mode to ASUS Gaming HDR, ASUS
Cinema HDR, or Console H DR. The HDR brightness can be
adjusted when the Brightness Adjustable function is enabled.
• Aspect Control : Select the aspect ratio and adjust the screen
position.
• Blue Light Filter : Reduce the energy level of blue light emitted
from the LED backlight.
•
Level 0 : No change.
• Level 1~4 : The higher the level, the less blue light is
scattered. When Blue Light Filter is activated,the default
settings of Racing Mode will be automatically imported.
Between Level 1 to Level 3, the Brightness function is user-
configurable. Level 4 is optimized setting. The Brightness
function is not user-configurable.
The Monitor uses low blue light panel and compliance with TÜV
Rheinland Low Blue Light Hardware Solution at factory reset/default
setting mode (Brightness: 90%, Contrast: 80%, CCT: 6500K,
Preset mode: Racing mode, Power Setting: YES).