Asus VA27DQ 27" 16:9 FreeSync Eye Care IPS Monitor - Manual (Page 25)

3-5 ASUS VA27D Series LCD Monitor
• ASCR : Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
• Adaptive-Sync/Free-Sync (DisplayPort and HDMI only) : Allows an
Adaptive-Sync/Free-Sync supported* graphics source to dynamically
adjust display refresh rate based on typical content frame rates for power
efficient, virtually stutter free and low-latency display update.
* Adaptive-Sync/Free-Sync (DisplayPort and HDMI only) can only be activated
within 48Hz ~ 75Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
• Position (Only available for VGA input) : adjusts the horizontal position
(H-Position) and the vertical position (V-Position) of the image. The
adjusting range is from 0 to 100.
• Focus (Only available for VGA input) : reduces Horizonal-line noise
and Vertical-line noise of the image by adjusting (Phase) and (Clock)
separately. The adjusting range is from 0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
• Auto Adjust. : Automatically adjusts the image to its optimized position,
clock, and phase (for VGA mode only).
5. Sound
Set the sound related settings from this menu.
ASUS VA27DQSB
Standard Mode HDMI 1920 x 1080 @ 60Hz
Volume
Mute
Source
Sound
• Volume : the adjusting range is from 0 to 100.
• Mute : toggles the monitor sound between on and off.
• Source : decides the monitor sound comes from which source.