Asus TUF Gaming VG32UQA1A 31.5" 4K HDR 160 Hz Gaming Monitor - Manual (Page 10)

1-3
Chapter 1: Product Introduction
• Displays the input selection bar when the monitor enters standby mode
or displays the “NO SIGNAL“ message.
5. Power button/power indicator:
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode/No signal
OFF OFF
1.3.2 Back view
1
8
3 4 6 7 5 2
1. Earphone jack . This port is only available when an HDMI/
DisplayPort/Type-C cable is connected.
2. HDMI ports . These ports are for connection with an HDMI compatible
devices.
3. DisplayPort . This port is for connection for a DisplayPort compatible
device.
4. USB Type-B . This port is for connection with a USB upstream cable.
The connection enables the USB ports on the monitor.
5. USB Type-A . These ports are for connection with USB devices,
such as USB keyboard/mouse, USB flash drive, etc and for firmware
upgrade.
6. DCIN port . This port connects the power adapter.
7. Kensington lock slot .
8. Control buttons .