Chapter 3: general instructions, 1 osd (on-screen display) menu, 1 how to reconfigure – Asus ProArt Display PA278QV 27" 16:9 Adaptive-Sync IPS Monitor User Manual
Page 19: Chapter.3:.....general.instructions, Osd.(on-screen.display).menu -1, How to reconfigure -1
3-1
ASUS PA278QV Series LCD Monitor
3.1
OSD (On-Screen Display) menu
3.1.1 How to reconfigure
ASUS PA278QV
Standard Mode DisplayPort 2560 x 1440@ 60Hz
Standard Mode
sRGB Mode
Rec 709 Mode
Scenery Mode
Reading Mode
Darkroom Mode
Rapid Rendering Mode
more
ProArt Preset
1. Press any button (except the Power button) to display the OSD menu.
2. Press the Menu button to activate the OSD menu.
3. Press the buttons as indicated on the screen to navigate through the
functions. Highlight the desired function and press
to activate it. If the
function selected has a sub-menu, press and
again to navigate
through the sub-menu functions. Highlight the desired sub-menu function and
press
to activate it.
4. Press and
to change the settings of the selected function.
5. To exit and save the OSD menu, press or repeatedly until the OSD menu
disappears. To adjust other functions, repeat steps 1-4.