Dell P2223HC 21.5" 16:9 IPS Monitor User Manual
Page 64
64
│
Operating the monitor
NOTE: If you select Yes for either of the features mentioned above, the
message will not appear the next time you change the settings of these
features. When you perform a factory reset, the message will appear
again.
When the monitor goes into Standby mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the
The OSD functions only in the normal operation mode. If you press the joystick
during the Standby mode, the following message will appear depending on the
selected input:
Activate the computer and the monitor to gain access to the
.
NOTE: The message may be slightly different according to the
connected input signal.
If either USB Type-C, DisplayPort, or HDMI input is selected and the corresponding
cable is not connected, the following message will appear:
NOTE: The message may be slightly different according to the
connected input signal.