GIGABYTE M32UC 31.5" 4K HDR 144 Hz Curved Gaming Monitor - Manual (Page 33)

- 33 -
Item Description
Quick Switch Assign the function of the hot keys.
Available options: Aim Stabilizer sync, Black Equalizer,
Volume, Input, Contrast, Brightness, Picture Mode,
and KVM Switch.
The default setting of the hot keys as below:
D Up ( ): Black Equalizer
D Down ( ): Picture Mode
D Right ( ): Input
D Left ( ): Volume
Other Settings • Resolution Notice: When this function is enabled,
the recommended resolution message will appear
on the screen when the monitor switches to
another input source.
• Input Auto Switch: When this function is enabled,
it automatically switches to an available input
source.
• Auto Power OFF: When this function is enabled,
the monitor will automatically turn off after a
certain amount of time.
• LED Indicator: By default, the LED indicator is set
to Always ON.
- LED Indicator Always OFF: Turn off the Power LED.
- LED Indicator Always ON: The Power LED lights white
during operation and lights interval every 1 sec in
standby mode.
- LED Indicator Standby ON: The Power LED turns off
during operation and lights interval every 1 sec in
standby mode.
- When the power supply is switched off, the Power
LED will remain off.
• Type-C Compatibility: Turn this option on to
improve mobile devices compatibility.
• HDMI-CEC: When enable this function, CEC device
(support Sony, Microsoft XBOX and Nintendo)
could turn on the monitor when they are waken
up and switch off the display when they enter
either Standby or off mode.