HP OMEN 32q 31.5" QHD HDR 165 Hz Gaming Monitor - Manual (Page 22)

3. Move the controller up, down, left, or right to navigate menu choices. Press the center of the
controller to make a selection.
The following table lists possible menu selections in the OSD main menu. It includes descriptions for
each setting and its impacts on your monitor's appearance or performance.
Table 2-1 OSD menu options (select products only)
Main menu Description
Gaming Selects and adjusts gaming preferences, such as AMD FreeSync™ or Adaptive-Sync, MPRT,
response time, frame rate, crosshair, message timers, and multiple-monitor alignment.
Image Adjusts the screen image, including brightness, contrast, dynamic contrast, black stretch,
sharpness, video level, and image scaling.
Color Provides a variety of color presets that configure the monitor for different viewing situations.
Input Selects the video input signal (DisplayPort or HDMI).
Power Adjusts the power settings.
Menu Adjusts the OSD menu.
Management Returns all OSD menu settings to the factory default settings.
Information Contains information about current mode, optimal mode, color setting, display mode, firmware
package version, hardware revision, and serial number.
Exit Exits the OSD menu screen.
Selecting color presets
Use the OSD menu to select from a variety of color presets that configure the monitor for a variety of
different viewing situations.
To access the color presets:
1. In the OSD menu, select the Color menu.
2. Select a color preset. The following table describes the available color presets.
NOTE: Each preset has both a standard dynamic range (SDR) and high dynamic range (HDR)
configuration.
Table 2-2 Color presets and descriptions
Color preset Description
Gaming A high brightness preset that takes advantage of the native, wide gamut of the monitor. In HDR, this
preset uses the 2084 PQ + clip response, as recommended by the HDR Gaming Interest Group, a
consortium of gaming developers and monitor manufacturers.
Standard Recommended for general computing use, this preset has an sRGB gamut in SDR and a P3 gamut in
HDR. Both modes have a D65 white point.
Warm This color preset provides a warmer D55 white point for the SDR mode. This white point is close to
that used by 35 mm projectors and may be preferred for watching black-and-white films because it
more closely matches their original appearance.
Cool Identical to the Standard color preset, but provides a cooler, more blue look than the standard white
point. This preset uses a D75 white point.
Selecting color presets 17