Maintaining the monitor, Maintenance guidelines, Cleaning the monitor – HP Z34C G3 34" 21:9 Curved WQHD IPS Monitor User Manual

Page 35: Cleaning the monitor shipping the monitor, Maintaining the monitor 5

Advertising
background image

Maintaining the monitor

5

Properly maintained, your monitor can run for many years. These instructions provide steps you can perform

to keep your monitor in the best condition.

Maintenance guidelines

Follow these instructions to enhance the performance and extend the life of the monitor.

Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls

that are covered in the operating instructions. If the monitor is not operating properly or has been

dropped or damaged, contact an authorized HP dealer, reseller, or service provider.

Use only a power source and connection appropriate for this monitor, as indicated on the label or back

plate of the monitor.

Be sure that the total ampere rating of the products connected to the outlet does not exceed the current

rating of the AC outlet and that the total ampere rating of the products connected to the cord does not

exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for

each device.

Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug

firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.

Turn the monitor off when it is not in use, and use a screen saver program. Doing this can substantially

increase the life expectancy of the monitor.

NOTE:

A burned-in image on the monitor is not covered under the HP warranty.

Never block the slots and openings of the cabinet or push objects into them. These openings provide

ventilation.

Do not drop the monitor or place it on an unstable surface.

Do not allow anything to rest on the power cord. Do not walk on the cord.

Keep the monitor in a well-ventilated area, away from excessive light, heat, or moisture.

Cleaning the monitor

Use these instructions to clean your monitor when necessary.

1.

Turn off the monitor and unplug the power cord from the AC outlet.

2.

Disconnect any external devices.

3.

Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth.

30

Chapter 5 Maintaining the monitor

Advertising
This manual is related to the following products: