Lenovo Legion Y25g-30 24.5" HDR 360 Hz Gaming Monitor - Manual (Page 33)

Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 7,
Microsoft Windows 10.
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
1. Turn off the computer, all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your
computer to start the Windows 7 operating system.
4. From the Lenovo website http://support.lenovo.com/docs/
Y25g_30, find the corresponding monitor driver and download it to
a PC to which this monitor is connected (such as a desktop).
5. Open the Display Properties window by clicking Start, Control Panel,
Hardware and Sound icon, and then click the Display icon.
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8.
Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11.
Click Update Driver, then click Browse the computer to find the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Hard Disk button. By clicking the Browse button, browse and point to the
following path:
X:\Monitor Drivers\Windows 7
(where X indicates “the folder in which the downloaded
driver is located”(such as a desktop)).
14. Select the “len y 25g-30.inf” file and click the Open button. Click the OK button.
15. In the new window, select LEN Y25g-30 and click Next.
16. After the installation is complete, delete all downloaded files and close all windows.
17. Restart the system. The system will automatically select the maximum
refresh rate and corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.
Chapter 3.Reference information 3-5