Lenovo L29w-30 29" 21:9 Monitor - Manual (Page 19)

2-4 Flat Panel Monitor User’s Guide
Using On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD�
Input Signal: HDMI
L29w-30 2560x1080
Brightness
Contrast
DCR
DisplayMode
Scaling Mode
OverDrive
To use the controls:
1� Press to open the main OSD menu�
2� Use or to move among the icons� Select an icon and press to access the selected
function� If there is a sub-menu, you can move between options using or , then press to
select that function� Use or to make adjustments then press to save�
3� Press to move backwards through the sub-menus and exit from the OSD�
4� Press and hold for 10 seconds to lock the OSD� This will prevent accidental adjustments to the
OSD� Press and hold for 10 seconds to unlock the OSD and allow adjustments to the OSD�
5� Enables DDC/CI by default� Use OSD Exit Key, Press and hold for 10 seconds to
disable/enable DDC/CI function� A message “DDC/CI disable” is shown on the screen�
6� The ENERGY STAR option resets all user settings to default values so that the monitor can
meet the requirements of Energy Star�
Energy Star is an energy saving program for consumer electronics led by the U�S� government�
It was launched in 1992 by EPA and DOE to reduce energy consumption and greenhouse gas
emissions� Energy Star logo is a symbol of energy conservation and environmental protection�
It improves the concept of energy efficiency of consumers and manufacturers, and effectively
guides the market�
The regulation of Energy Star improves energy efficiency and reduces air pollution by using
more energy-efficient equipment in homes, offices and factories� One way to achieve this goal
is to use management to reduce energy consumption when products are not in use�
The default settings for monitors conform to Energy Star certification� Any changes by users
for more features and functionalities may increase power consumption, which will exceed
the limitation of Energy Star’s standard� If the user changes the options related to energy
efficiency when using, such as brightness, color mode, etc�, select All Reset Factory or choose
the Energy Star option, the power consumption will be restored to the energy efficiency with
Energy Star standard�
For more information, please refer to (www�energystar�gov/products)� All products of Energy
Star will be posted online and can be accessed directly by governments, public institutions and
consumers�