Customizing settings, Activating the main menu – LG 24BK750Y-B 24" 16:9 IPS Monitor User Manual
Page 21
20
ENG
ENGLISH
CUSTOMIZING SETTINGS
Activating the Main Menu
Picture Mode
Menu > Quick Settings
Description
Brightness
Adjusts the color contrast and brightness of the screen.
Contrast
Ratio
Adjusts the screen ratio.
Wide
Displays the video in wide-screen, regardless of the video signal input.
Original
Displays a video according to the input video signal aspect ratio.
SMART ENERGY
SAVING
High
Enables SMART ENERGY SAVING you can save energy with this energy-
high efficient function.
Low
Enables SMART ENERGY SAVING you can save energy with this energy-
low efficient function.
Off
Disables SMART ENERGY SAVING .
NOTE
y
The display may look the same for Wide, Original options at the recommended resolution (1920 x 1080).
y
The ratio is disabled in the interlaced signal.
y
Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor. If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower
depend on source.
* SMART ENERGY SAVING :
Conserve energy by using luminance compensation algorithm.
1
Press the Menu ( ) button.
2
Use the , , , buttons to adjust the options.
3
Press the Menu ( ) button to exit the OSD menu.
Button
Description
Menu ( )
If the menu is inactive
Activates the main menu.
If the menu is active
Exits the OSD menu when the button is pressed.
If the menu is inactive
Adjusts the volume level of the monitor.
If the menu is active
Left directional key.
If the menu is inactive
Adjusts the volume level of the monitor.
If the menu is active
Right directional key.
INPUT
Sets input mode. You can operate the change of input sig nals.
• When two input signals over are con nected and select the input menu, input signal(DVI/HDMI/DP) will be
changed sequentially.
• When only one signal is connected, it is automatically detected. The default setting is DVI.
(Power Button)
Powers on or off.
Power Indicator
When the monitor is in operating mode, the power indicator will turn white (on mode).
Customizing settings
Monitor buttons