Important safety instructions – Epson 2250 User Manual

Page 5

Advertising
background image

Important Safety Instructions

.

.

.

.

.

.

.

.

.

.

.

.

.

Read all of these instructions before you set up your printer.

Follow all warnings and instructions marked on the printer.

Unplug the printer from the wall outlet before you clean it, and use a damp

cloth for cleaning, not liquid or aerosol cleaners.

Do not use your printer near water or spill any liquid on it.

Do not place the printer on an unstable cart, stand, table or other surface that

may allow the printer to fall.

Do not block any slots or openings in the cabinet. These are provided for the

ventilation necessary to ensure reliable operation and protection from

overheating. Placing the printer on a bed, sofa, rug, or other similar surface

may block the openings. Also, do not place the printer in a built-in installation

unless proper ventilation is provided.

Never place the printer near or over a radiator or heat register.

Use the type of power source indicated on the label. If you are not sure of the

type of power available, consult your dealer or local power company.

This printer may be equipped with a plug having a third (grounding) pin,

which fits only into a grounding-type outlet. This is a safety feature. If you are

unable to insert the plug into the outlet, have an electrician replace your

obsolete outlet. Do not defeat the purpose of the grounding-type plug.

Do not put your printer where the cord will be walked on.

If you use an extension cord, make sure that the total of the ampere ratings on

the products plugged into the extension cord does not exceed the extension

cord’s ampere rating. Also, make sure that the total of all products plugged

into the wall outlet does not exceed 15 amperes.

Never push objects of any kind into your printer because they may touch

dangerous voltage points or short out parts that could result in a risk of fire or

electric shock.

Except as specifically explained in the user’s manual, do not attempt to repair

the printer yourself. This could expose you to dangerous voltage points or

other risks. Refer all servicing in those compartments to service personnel.

iii

Advertising