Epson 2250 - Manual (Page 54)

Using the Default-Setting Mode
7. Press the LF/FF button to change the setting. The READY light
turns on or off to show your selection, as indicated in Table B,
and your new setting is saved automatically and remains in
effect until you change it.
If you are changing the character table, page length, or TOF
position, go to step 8 next. Otherwise, go to step 9.
8. If you are changing the character table, page length, or TOF
position, you must make additional settings as shown in the
tables below. Press the LF/FF button until light 1, light 2, and the
READY light indicate your selection. Then press the FONT button
to set the feature.
Once you press the
FONT button, the printer advances to the next
item in table B and your setting is saved automatically. The new
setting remains in effect until you change it.
3-10 Using the Printer