MSI G271C E2 27" 170 Hz Curved Gaming Monitor - Manual (Page 20)

20
OSD Menus
Auto Scan OFF ∙ Users can use the OSD Key to select Input
Source at below status:
• While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
• While “No Signal” message box is shown
on the monitor.
ON
PIP/PBP
(G271CQP E2/G321CQP E2)
1st Level Menu 2nd/3rd Level Menu Description
OFF ∙ PIP (Picture in Picture) allows
users to simultaneously display
multiple video sources on one
screen. One program is displayed
on the full screen at the same
time as one or more other
programs are displayed in inset
windows.
∙ PBP (Picture by Picture) is a
similar feature that displays two
input sources side-by-side on the
screen.
∙ Display Switch allows users to
switch between primary and
secondary input sources.
∙ If there is only one signal input,
the Display Switch and Audio
Switch will be grayed out.
PIP Source HDMI1
HDMI2
DP
PIP Size Small
Medium
Large
Location Left Top
Right Top
Left Bottom
Right
Bottom
Customize
Display Switch
Audio Switch
PBP Source 1 HDMI1
HDMI2
DP
Source 2 HDMI1
HDMI2
DP
Display Switch
Audio Switch