Planar Systems PXL2230MW 21.5" 16:9 Touchscreen LCD Monitor - Manual (Page 11)

9
Basic Operation and Calibration/Reset Instructions
Before using the TFT Touchscreen LED LCD monitor:

Connect external equipment properly.
 Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the TFT Touchscreen LED LCD monitor on/off:
Press
POWER button on the front. The power LED indicator light will be blue when the TFT
Touchscreen LED LCD monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the TFT Touchscreen
LED LCD monitor.
1
Displays main menu
Exits from OSD menu
2 Selects between VGA, DVI, HDMI or Auto mode
▼
Select the desired item when in OSD menu
When not in OSD menu, directly enters BRIGHTNESS Menu, press 3 seconds
enters AUTO IMAGE ADJUST
▲
Select the desired item when in OSD menu
When not in OSD menu, directly toggles Blue Light. (OFF, VIDEO, WEB
BROWSING, READING, LOW LIGHT)
▼
+
▲
Recalls both Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When Touchscreen LED Monitor is in normal mode, the “OSD Lock Out” function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the 1 button and the
▲
button for 3 seconds to lock the OSD buttons.
The Touchscreen LED Monitor will show an “OSD Lock Out” message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.