Operation instructions – Planar Systems PXL2230MW 21.5" 16:9 Touchscreen LCD Monitor User Manual

Page 3

Advertising
background image

1

Operation Instructions

Thank you for purchasing the PXL2230MW multi-touch LED LCD monitor. Please read this guide
thoroughly before installation.


FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)

This TFT LED LCD monitor has been tested and found compliant with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper
protection against harmful interference to a residential installation. This TFT Touchscreen LED
LCD monitor generates, uses, and can radiate radio frequency energy. Harmful interference to
radio communication may be the result if it‘s not properly installed and used. However, there is
no guarantee that interference will not occur in a particular installation. If this TFT Touchscreen
LED LCD monitor does cause serious interference to radio or television reception, resetting may
correct it. Moreover, users are encouraged to reduce interference by doing one or more of the
following:

Reorient or relocate the receiving antenna.

Move the TFT Touchscreen LED LCD monitor and the receiver further away from each other.

Connect the TFT Touchscreen LED LCD monitor into an outlet on a circuit different from
that to which the receiver is connected.

Consult your local dealer or a qualified technician.

FCC Warning:

To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to this TFT Touchscreen LED LCD monitor would void the user‘s
authority to operate this device.


Note:

If necessary, shielded interface cables and AC power cord must be used to meet the

emission level limits.















Advertising