Using an optional grid – Angler Silverbox Softbox (18") User Manual
Page 8
Advertising
Using an optional grid
An optional grid provides more control over the
light of your softbox by producing a narrower beam
of light than the softbox alone.
1. Be sure to install the softbox front diffuser at
the rear edge of the softbox touch fastener
strip.
2. Press the grid’s touch fastener firmly against
the softbox’s touch fastener strip as smoothly
as possible along the length of one side.
3. Repeat for the remaining sides of the grid,
attaching sides in opposite pairs.
1
2
8
Advertising