Sennheiser ACCENTUM Over-Ear Wireless Headphones (Black) - Manual (Page 31)

Using the headphones
ACCENTUM | 31
Adjusting sound effects/the equalizer
To be able to use the sound effects/the equalizer, you require the
Smart Control app (> 18).
▷
In the Smart Control app, select the desired sound effects via the
equalizer. You can use predefined presets, define sound modes
(e.g. bass boost) or define your own settings.
The sound effects are stored in the headphones. These sound
settings are active even without using the Smart Control app, i.e.
when you are using a different Bluetooth device.
Setting the voice prompts/sound signals
To be able to set the voice prompts and sound signals, you require
the Smart Control app (> 18).
In the app settings, you can activate voice prompts and sound sig-
nals (default setting) or deactivate them completely.
Deactivating Bluetooth/activating flight
mode
Deactivate the Bluetooth wireless connection when wireless con-
nections are not allowed, such as on an aircraft during take-off and
landing.
The active noise cancellation ANC can be fully used provided that
the rechargeable battery is charged (> 25).
To deactivate the Bluetooth wireless connection and activate flight
mode:
▷
Press the main button 5x.
You hear the voice prompt “No connection”. The Bluetooth wire-
less connection is deactivated.
To activate the Bluetooth wireless connection again:
▷
Press the main button 5x.
You hear the voice prompt “Connected”. The Bluetooth wireless
connection is activated.
The Sound Check function of the Smart Control app allows you
to create customized equalizer presets. Sound Check guides
you step by step to the optimal results.
5x
R
ON/OFF