Panasonic DMP-BD84P-K Full HD Blu-ray Disc Player - Manual (Page 19)

- 19 -
Settings
∫ Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ “Auto” is effective only when playing Dolby
TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
¾ Dolby Audio (DD/DD+/DTHD)
¾ DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
≥ If you do not make proper settings the audio
may be static or noisy.
¾ BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
≥ The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
∫ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch).
≥ This function works when the following
conditions are met:
– Audio recorded at 96 kHz or lower is output.
– “Digital Audio Output” is set to “PCM” when
audio other than PCM is output.
∫ Voice Guidance Setting
Voice Guidance reads aloud currently-selected
items. (It is also possible to display the “Voice
Guidance Setting” screen by pressing and holding
the [OPTION] button for at least 5 seconds while
the HOME menu is displayed.).
≥ Voice guidance is only available in HOME menu
and Player Settings.
Audio
DMP-BD90_TQBS0470_eng.book 19 ページ ２０２３年１月１３日 金曜日 午前９時４１分