Bolt VS-260F Compact On-Camera Flash for Cameras - Manual (Page 11)

Installing Batteries | 11
To install batteries, make sure the VS-260F is turned off and follow these steps:
1. Press on the battery compartment cover and slide it in the direction of the arrow.
2. Insert batteries in the orientations indicated inside the compartment.
3. Replace the battery compartment cover by pressing and sliding it into place, in the opposite direction of
the arrow on the cover.
Important!
Replace both batteries at the same time. Do not mix battery types or brands, or use old and new batteries
together.
LOCK
OFF ON
TEST/
READY
TTL OK
LOCK
OFF ON
TEST/
READY
TTL OK
LOCK
OFF ON
TEST/
READY
TTL OK
1 2 3