Preparation, Attaching the carry strap, Inserting/removing the battery – LEICA M6 Rangefinder Camera User Manual

Page 18

Advertising
background image

PREPARATION ▸ ATTACHING THE CARRY STRAP / INSERTING/REMOVING THE BATTERY

18

PREPARATION

ATTACHING THE CARRY STRAP

Attention

• Once you have attached the carry strap, please make sure that the

clips are mounted correctly to prevent the camera from falling.

INSERTING/REMOVING THE BATTERY

The Leica M6 requires two silver oxide coin batteries (PX76/SR44)

or one lithium battery (DL1/3N) for exposure metering.

Fig. 1

Fig. 2

▸

Unscrew the cover over the battery compartment in counter-clock-

wise direction
• Depending on the country version, a tool (a flat-tip screwdriver,

a coin or similar) may be required to open/close the cover over

the battery compartment.

▸

Place the battery with the plus pole facing the opening into the

battery compartment (fig. 2).
• Any residual oxidation on the battery must be removed before

inserting the battery.

▸

Position the cover over the battery compartment correctly

▸

Reattach and screw in the locking screw in clockwise direction

Note

• Ensure that the cover over the battery compartment is sufficiently

tightly attached.

Advertising