Optex IVPC-DI iVision+ Connect Door Interface - Manual (Page 2)

2 Remove the main unit
from the mounting plate. 3
Pass the wires through and fix
the mounting plate to the wall.
Power
10 to 24 V AC/DC
COM
N.C. (ex. Maglock)
N.O. (ex. Strike)
4
Wire to the terminals.
5 Mount the main unit on the mounting plate.
- One IVPC-DS can pair up to four IVPC-DI. However, only one IVPC-DI can be assigned to
operate its relay. The other three are limited to sounding their chimes.
- For example, one IVPC-DI operates the door-lock at the front while a second IVPC-DI serves
as a chime in a back room.
- The chimes sound simultaneously with the same type of tone.
1 After accepting the call, press the icon
shown below to start the wizard for
the IVPC-DI.
2 Confirm the correct number of paired
chimes is shown at the completion of
the wizard.
3
1
Mounting and wiring
2
Pairing
2
1
1
2
- 2 -
6 Turn on all equipment.
1 Turn off all equipment including
the external devices of the system.
OFF
ON
NOTE
Polarity is not a concern.
Slide up. Pull off.
Attach
Slide down.
NOTE
Press the doorbell on IVPC-DS to
be paired with the IVPC-DI.
3
Unlock setting
1 Select which chime will also
function as a door release.
2 “Unlock” marking is indicated
on the assigned IVPC-DI.
Press the “Unlock Setting” button.