NEC E558 55" Class 4K UHD Commercial LED TV - Manual (Page 57)

English - 54
Screen Adjustment Using a Browser
Access the following address to show HOME. Click the links on the left-hand column on the HOME screen to access the setting
screens.
http://<Address IP of the monitor>
The default login password is “admin”.
OSD Menu Settings in the Monitor eb Controls
The functions related to the network can be configured the same way as in the OSD menu using the links below.
Top INPUT SOURCE: HDMI1
STATUS
PROTOCOL
STATUS
SYSTEM
MODEL NAME E438
SERIAL XX3XXXXXXX
FIRMWARE VERSION Vx.x.x / Vx.x.x
LOCAL TIME WWW MMM DD XX:XX:XX 20YY
UPTIME XXh XXm XXs
NETWORK
IP ADDRESS 192.168.0.10
SUBNET MASK 255.255.255.0
DEFAULT GATEWAY 0.0.0.0
DNS PRIMARY 0.0.0.0
DNS SECONDARY 0.0.0.0
MAC Address XX:XX:XX:XX:XX:XX
NETWORK
SYSTEM
LOGOUT
TCP
ROOMVIEW
CRESTRON CONTROL
AMX
NAME
OVERVIEW
NOTEN: The Crestron functions are only available on monitors that have a serial number with a third-digit of "3" or
higher (xx3xxxxxxx).
You can check the monitor's serial number at [Setup]->[Monitor Information]->[SN:].