Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 170)

155
6. Installation and Connections
❷
Making Connections
A computer cable, BNC cable (5-core type), HDMI cable, or a DisplayPort cable can be used to connect to a computer.
The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection.
Analog RGB signal connection
• Connect the computer cable to the display output terminal (mini D-sub 15 pin) on the computer and the computer video input
terminal on the projector. Please use a computer cable attached with a ferrite core.
• When connecting the display output terminal (mini D-sub 15 pin) on the computer to the BNC video input terminal, use a
conversion cable to convert the BNC cable (5 core) to a mini D-sub 15 pin cable.
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
INPUT button on the projector
cabinet
Button on the remote control
COMPUTER IN 7:COMPUTER 7/COMPUTER
BNC IN 4:BNC 4/BNC
COMPUTER IN
BNC IN
AUDIO IN
AUDIO IN
Computer cable (sold commercially)
Stereo mini-plug audio
cable (not supplied)
RGB - to - BNC cable
(not supplied)
Stereo mini-plug audio cable (not supplied)
NOTE: Please check the operating manual of the computer as
the name, position and direction of the terminal may differ
depending on the computer.