Electrolux 55750 - Manual (Page 14)

14
Program display
The illuminated symbols in the display indicate which
phase of the program is currently running.
Remaining running time
As soon as a program starts, the time remaining lights
up in the display field in minutes. This time varies deĆ
pending on the loading and temperature of the incomĆ
ing water. The display may remain at one time for sevral
minutes. It may also jump in time this quite normal,
and does not indicate a fault.
End of the program
The illumination of a "0" in the start delay display and
the program end symbol in the program display indiĆ
cate the end of the washing program.
Safety lock
The safety lock prevents an accidental restart after the
end of the program. In order to be able to enter a new
program, the dishwasher must either be switched off
and then on again, or the door must be opened and
then closed again.
The safety lock is released as soon as only the
Programme End symbol is illuminated in the
programme display.
Delay start
The start of the selected program can be delayed betĆ
ween 1 and 9 hours in steps of 1 hour using the Start
Time Pre-selection button.
- By repeatedly pressing the button, the delay time
can be programmed in hours, and will be disĆ
played in the display field. Display: Hours and a
small "h".
Pre-rinse
Cleaning
Rinsing
Drying
Program end