Encore electronic ENUWI-N3 - Manual (Page 25)

Advanced Configuration
The Advanced tab is used to configure Tx burst, WMM, and CCX.
h Wireless mode: Currently supports 2.4G wireless only.
h Enable Tx BURST: Click the check box will enhance the throughput
h Enable TCP Window Size: Enhance the throughput if enable this function.
h WMM Enable: Click the check box to enable WMM QoS capability. (XP only)
h CCX: Enable this option if the network supports Cisco Compatible
Extensions. (XP only)
h Click on the Apply button to close this window.
WPS™
WPS (Wireless Push Button) is used for WiFi Protected Setup™. By pressing
this button, the security settings of the device will automatically synchronize with
other wireless devices on your network that support Wi-Fi Protected Setup™.
25