Encore electronic ENUWI-N3 - Manual (Page 43)

h Wireless mode: Select 802.11 B/G/N mixed if the wireless network uses
both 11b, 11g and 11n stations and APs.
h Tx Rate: The transmit rate should be set to auto, however you may
manually select a transmit rate from the drop-down list.
h Tx BURST: Click the check box will enhance the throughput
h Click on the Apply button to save the changes.
WPS™
WPS (Wireless Push Button) is used for WiFi Protected Setup™. By pressing
this button, the security settings of the device will automatically synchronize with
other wireless devices on your network that support Wi-Fi Protected Setup™.
43