Installing raid driver – MSI PRO B550-VC AM4 ATX Motherboard User Manual
Page 63
63
AMD RAID Configuration
Installing RAID Driver
New Operating System Installation
The following details the installation of the drivers while installing operating system.
1.
During the operating system installation, after selecting the location to install
Windows click on
Load driver
button to install a third party RAID driver.
2.
When prompted, insert the
USB flash drive with
AMD RAID Drivers
and then click
Browse
.
▪
To make an
AMD RAID Drivers
USB flash drive. Insert the MSI Driver Disc into
the optical drive. Copy all the contents in \\Storage\AMD\
3.
Navigate to the directory containing the saved AMD RAID drivers, then click
OK
.
4.
Select the
(rcbottom.inf)
driver, click
Next
.
5.
When prompted, click
OK.
6.
Click
Browse
and navigate to the directory containing the saved AMD RAID drivers
again, then click
OK
.
7.
Select the
(rcraid.inf)
driver, click
Next
.
8.
You have successfully installed the RAID driver, and Windows setup should
continue.
9.
Leave the disk/ USB drive in the computer until the system reboots itself.
Windows setup will need to copy the files after the RAID volume is formatted, and
Windows setup starts copying files.
AMD RAIDXpert2 Management Suite Installation
1.
Set the
SATA Mode
to
RAID Mode
in BIOS
2.
Insert the MSI Driver Disc into the optical drive.
3.
Click the
Select to choose what happens with this disc
pop-up notification, then
select
Run DVDSetup.exe
to open the installer. If you turn off the AutoPlay feature
from the Windows Control Panel, you can still manually execute the
DVDSetup.
exe
from the root path of the MSI Driver Disc.
4.
Under the
Drivers/Software
tab, check the
AMD RAID Drivers
check-box.
5.
Click the
Install
button.
6.
When prompt you to restart, click
OK
button to finish.
7.
Restart your computer and enter the Windows operating system.
8.
Double-click the
RAIDXpert2
icon to open the RAIDXpert2 Web GUI.
▪
Default credentials are:
▫
Username -
admin
▫
Password -
admin
9.
Change the credentials:
▪
Create new username and password
10.
Re-log into the RAIDXpert2 Web GUI with the new credentials.