Elo TouchSystems ET1546L-XXWA-X - Manual (Page 21)

2-16 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e
Connecting the Power Cable
Depending on where you live, you will use either the European or US/Canadian
power cable.
• Connect the female end of the power cable into the power port on the
touchmonitor.
N OTE : To protect your equipment against risk of damage from electrical surges in the power
line, plug the touchmonitor’s power cord into a surge protector, and then connect the
surge protector to a grounded (three-pronged) AC electrical outlet.
• Power on your PC then your touchmonitor. After a brief pause the picture
should appear.
Connections on underside
Power Cable
Power cable