Elo TouchSystems ET1546L-XXWA-X - Manual (Page 28)

3-23
C H A P T E R
C HAPTER 3
O
PERATION
About Touchmonitor Adjustments
Your touchmonitor will likely require adjustment. Variations in video output
and application will require you to adjust your touchmonitor to optimize the
quality of the display.
For best performance, your monitor should be operating in native resolution,
that is 1024 x 768 at 60-75 Hz. Use the Display control panel in Windows to
choose 1024 x 768 resolution.
Operating in other resolutions will degrade video performance. For further
information, please refer to Appendix A.
All adjustments you make to the controls are automatically memorized. This
feature saves you from having to reset your choices every time you unplug or
power your touchmonitor off and on. If there is a power failure your
touchmonitor settings will not default to the factory specifications.
Using the On-Screen Display Menus
All adjustments are made by using the on-screen display (OSD) menus. All
menu items can be selected by using the buttons on the side bezel.
N OTE : OSD menu default is enabled. Press the UP and DOWN buttons at the same time to
enable/disable the OSD functions