Epson R380 - Manual (Page 23)

Printing Photos 23
9. Press u or d to highlight the settings shown in the following table, then press
r to display the list of options. Press u or d to select the option you want,
then press OK.
Setting Description
Filter Select Sepia to print your photo in a brown tone for an
old-fashioned look. Select B&W to print your photo in black
and white.
Enhance Select PhotoEnhance to automatically adjust the brightness,
contrast, and saturation of your photos.
Select P.I.M. to use your camera’s PRINT Image Matching or
Exif Print settings.
Red Eye
Reduction Select On to correct red eye. See page 24 for more information.
Brightness Adjust this setting if your prints are too light or too dark.
Contrast Adjust this setting to increase the contrast.
Sharpness Adjust this setting to sharpen or soften your prints.
Saturation Adjust the density of color. A higher saturation makes the color
appear richer, while a lower saturation makes it appear paler.
Date Prints the date your photo was taken in one of the following
formats:
yyyy.mm.dd (2006.04.13), mmm.dd.yyyy (Apr.13.2006),
dd.mmm.yyyy (13.Apr.2006), or None (no date).
Print Info. Select On to print your camera’s exposure time (shutter speed),
F-stop (aperture), and ISO speed.
Fit Frame Select On to automatically crop your photo to fit inside the
space available for the layout you selected. Select Off to turn off
automatic cropping and leave white space around the photo.
Bidirectional Select On to increase the print speed. Select Off to improve the
print quality (but your photos print more slowly).
Expansion When you print borderless photos, your image is slightly
expanded and cropped to fill the sheet of paper. If too much of
your photo edges are cut off, select Mid or Min.